AS ISO 7132:2021 pdf download.Earth-moving machinery一Dumpers一 Terminology and commercial specifications.
This Intonational Standard estabilahes a terminology br, and the content of. commercial literature sprcilicatians For selI.propeUcd dumpers (including compact dumpers), as defined in ISO 6165. used in earth moving.
2 Normative references
The lulluwing rderenwd ducumcnts are indispeiisabhi br the appi.uation ul this document, Fur dated references, only the edition cited apphes. Fur undated references, the latest edition or the referenced doiuirnn (including any amendments) applies.
ISO 3450, Earth-movmp machinery — Braking systems c nthber-tyred machines — Systems and
performance requirements and test procedures
ISO 5010. Earth-moving machinery — Ruhber-tyredmachfrses — Steering rrqwrnmenrs ISO 6014:1986, Earth-movIng machinery — Determination o!gruund speed
ISO (i016:19911. Earth-moving machinery — Methods a measuring the masses i tt*ok machines. their equipment and components
ISO 6165. Earth-movIng machinery — Basic types — Vocabulary
ISO 64113:1980, Earth-mrrvlng machinery — Dumper bathes — Volumetric rating
ISO 6746-1. Earth-iriiwmp machinery — Definitions c1f dimensions and codes — Part 1: Base machine
ISO 7457:1997, Earth.rnovmg machinery — Determination of turning djmeons of wheeled machines
ISO 9249:1997. Earth-moving machinery — Engine test code — Net power
3 Terms and definitions
For the purposes ol this document, the terms and delinitions given in ISO 6165 and the Miowing apply.
3.1 General
3.1.1dumper
self-propelled crowlcr or wheeled machine, with an open body, which transports and dumps or spreads material, loading being performed either by means external to the dumper a,- by wit-loading equipment
3.1.2base machine
machine with a cab or canopy and nperator.prntcctivr structures (if required), without equipment or attachments hut pocsessing the necessary mountings for such equipment and attachments
3.1.3equ lpnicnl
set of components mounted onto the base machine which allows an attactinwnt to perform its design function
3.1.4 self-loading equipment
an integral mounted, bucket-supporting structure and linkage permanently fitted to a compact dumper enabling it to fill its own open body with material
Note ito entry: See 4.1.5.
3.1.5 attachment
assembly of components that can be mounted onto the base machine or equipment for a specific use
3.1.6 component
part ofan assembly or of a base machine, equipment or an attachment
3.2 Performance
3.2.1 tractive force rimpull
force available between the tyre and the ground to propel the dumper
3.2.1.1 tractive force with direct drive transmission
tractive force calculated or measured at the maximum engine torque in each forward gear
Note 1 to entry: The maximum pull could be limited by mass and traction conditions.
3.2.1.2 tractive force rimpull with powershift transmission [electric drivel [hydrostatic drivel tractive force rimpull given by the calculated or measured pull versus machine speed curves in each forward gear range
Note 1 to entry: The maximum pull could be limited by mass and traction conditions.
3.2.2 empty body dump and return time
full movement cycle time of a body, door or ejector without load, at the rated engine speed.AS ISO 7132 pdf download.