BS EN ISO 9934-2-2015 pdf download.Non-destructive testing一 Magnetic particle testing Part 2: Detection media.
4 Safety precautions
The materials used in magnetic particle inspection and those used in their testing include chemicals that can be harmful, flammable, and/or volatile. All necessary precautions should be observed. All relevant regulations, including national and local regulations pertaining to health and safety, antipollution requirements, etc., shall be observed.
5 Classification
5.1 General
The magnetic particle materials covered by this specification shall be classified as follows.
5.2 Magnetic inks
Magnetic inks shall consist of finely divided coloured or fluorescent magnetic particles in a suitable carrier liquid. They shall form a uniform suspension when agitated.
Magnetic inks can be produced from products supplied as concentrates, including paste and powders, or ready for use.
5.3 Powders
Powders for the dry technique shall consist of finely divided coloured or fluorescent magnetic particles.
6 Testing and test certificate
6.1 Type testing and batch testing
Type testing and hatch testing of magnetic particle materials shall be carried out in accordance with the requirements of ISO 9934-1, ISO 9934-2, and ISO 9934-3.
Type testing is carried out in order to demonstrate suitability of a product for the intended use. Batch testing is carried out in order to demonstrate conformity of the characteristics of a hatch to the product type specified.
The supplier shall provide a test certificate showing compliance with this International Standard having used the methods detailed. This certificate shall include results obtained and tolerances allowed.
If any changes are made to the detection media, then a new type test shall be performed.
6.2 In-service testing
In—service testing is carried out to demonstrate the continued performance of the detection media.
7 Requirements and test methods
7.1 Performance
7.1.1 Type testing and batch testing
Type testing and batch testing shall be carried out according to Annex A using the reference blocks type 1 or type 2 as described in Annex B.BS EN ISO 9934 pdf download.