BS ISO 3310-1-2016 pdf download.Test sieves – Technical requirements and testing Part 1: Test sieves of metal wire cloth.
This part of Iso 3310 specifies the technical requirements and corresponding test methods for test sieves of metal wire cloth.
It applies to test sieves having aperture sizes from 125 mm down to 20 lIm, in accordance with ISO 565.
2 Normative references
The following referenced documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 565:1990, Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
ISO 2395, Test sieves and test sieving — Vocabulary
ISO 2591-1:1988, Test sieving — Part 1: Methods using test sieves of woven wire cloth and perforated
metal plate
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 2395 and the following apply.
3.1 test sieve
Note 1 to entry: ISO/IEC Guide 99:2007 defines a measuring Instrument” as a device used for making measurements, alone or in conjunction with one or more supplementary devices,
4 Designation
4.1 Test sieves of metal wire cloth shall be designated by the nominal size of the apertures of the metal wire cloth.
4.2 Nominal aperture sizes of 1 mm and above shall be expressed in mm; nominal aperture sizes below
1 mm shall be expressed in pm.
5 Metal wire cloth
5.1 Requirements
Aperture maximum permissible errors and wire diameters shall be as specified in Tables 1 and 2.BS ISO 3310-1 pdf download.