ISO 4014-2011 pdf download

ISO 4014-2011 pdf download.Hexagon head bolts — Product grades A and B (ISO 4014:2011). This International Standard specifies the characteristics of hexagon head bolts with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10d or 150 mm, whichever is the shorter, and product grade B for threads over M24 or nominal lengths over 10d or 150 mm, whichever is the shorter. If, in special cases, specifications other than those listed in this International Standard are required, they can be selected from existing International Standards, for example ISO 724, ISO 888, ISO 898-1, ISO 965-1,ISO 3506-1, ISO 4753 and ISO 4759-1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 225, Fasteners — Bolts, screws, st uds and nuts — Symbols and descriptions of dimensions ISO 724, ISO general-purpose metric screw threads — Basic dimensions ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread ISO 965-1, ISO general-purpose metric screw threads — Tolerances — Part 1: Principles and basic data ISO 3269, Fasteners — Acceptance inspection ISO 3506-1, Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs ISO 4017, Hexagon head screws — Product grades A and B ISO 4042, Fasteners — Electroplated coatings ISO 4753, Fasteners — Ends of parts with external ISO metric thread ISO 4759-1, Tolerances for fasteners — Part 1: Bolts, sc rews, studs and nuts — Product grades A, B and C ISO 6157-1, Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements ISO 8839, Mechanical properties of fasteners — Bolts, screws, studs and nuts made of non-ferrous metals ISO 8992, Fasteners — General requirements for bolts, screws, studs and nuts ISO 10683, Fasteners — Non-electrolytical ly applied zinc flake coatings.ISO 4014 pdf download.