AS ISO 10987:2021 Earth-moving machinery一Sustainability – Terminology, sustainability factors and reporting

AS ISO 10987-2021 Earth-moving machinery一Sustainability – Terminology, sustainability factors and reporting. This International Standard sets out general principles for addressing the sustainability of the earth- moving machinery defined in ISO 6165. It establishes a sustainability terminology, identifies significant sustainability factors for earth-moving machines and provides an example of a reporting format for sustainability information. This International Standard is applicable to the development and manufacturing processes and the useful life and end-of-life of earth-moving machines. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 5349-2, Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 2: Practical guidance for measurement at the workplace ISO 6165, Earth-moving machinery — Basic types — Identification and terms and definitions ISO 6395, Earth-moving machinery — Determination of sound power level — Dynamic test conditions ISO 6396, Earth-moving machinery — Determination of emission sound pressure level at operator’s position — Dynamic test conditions ISO 14040, Environmental management — Life cycle assessment — Principles and framework ISO 14044, Environmental management — Life cycle assessment — Requirements and guidelines ISO 16714, Earth-moving machinery — Recyclability and recoverability — Terminology and calculation method ISO 20474 (all parts), Earth-moving machinery — Safety ISO/TR 25398, Earth-moving machinery — Guidelines for assessment of exposure to whole-body vibration of ride-on machines — Use of harmonized data measured by international institutes, organizations and manufacturers 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 sustainability balance between social, environmental and economic needs that optimizes the current quality of life without sacrificing future quality of life 3.2 machine load factor parameter used to indicate how a machine is working relative to the capability of the machine, defined by the manufacturer for different types of machine applications, generally using three load factor categories — low, medium and high Note ito entry: It is usually expressed as a percentage of maximum machine capability.AS ISO 10987 pdf download.