UL 62275-2021 pdf free download.Cable Management Systems – Cable Ties for Electrical Installations. 5.10 Tests for adhesive fixing devices on a stainless steel or aluminium bare panel covers the installation on any bare metal surface and on the following painted metal surfaces: – enamel; – epoxy; – polyester. The installation on other surfaces requires testing on these materials and painted surfaces. Unless specified otherwise by the manufacturer, the samples are to be held to the panel for a period of 5 +1 0 with a force of (50 ± 5) N prior to the start of the prescribed pre-conditioning period or other exposures. Before applying any force, the time recommended by the manufacturer shall be respected. 5.10DV D1 ModifyClause 5.10 byreplacing itwith the following: Tests for rubber adhesive fixing devices and integral fixing devices on stainless steel or aluminum bare panel cover installation on any bare metal surface and on the following painted surfaces: – enamel; – epoxy; and – polyester. The installation on other surfaces shall be tested on those surfaces. 5.11DV D2 AddClauses 5.11DV.1 to 5.11DV.4 to Clause 5 as follows: 5.11DV.1 Tests for acrylic fixing devices and integral fixing devices on stainless steel or aluminum bare panel cover the installation on any bare metal surface. The installation on other surfaces shall be tested on those materials. 5.11DV.2 Any other generic type of adhesive used on a fixing device or an integral fixing device shall be tested on each surface type. 5.11DV.3 Unless specified otherwise by the manufacturer, the samples shall be secured to the panel for 5 (0/+1) seconds with a force of 50 ±5 N prior to the start of the prescribed preconditioning period or other exposures.UL 62275 pdf download.
Download Address
Download