BS ISO 6742-5 2015 pdf download

BS ISO 6742-5-2015 pdf download.Cycles一Lighting and retro- reflective devices Part 5: Lighting systems not powered by the cycle’s movement. 7 Test method 7.1 Lamps and interchangeable power source 7.1.1 Lamps emitting light to the front Lamps have to be tested corresponding with the test methods of Iso 6742-1:2015, 4.2 (Front position lamp), 4.5 (Low beam). 4.6 (High beam) and 4.7 (Direction indicators). The test voltage shall be the rated voltage of power source. 7.1.2 Lamps emitting light to the rear Rear lights have to be tested corresponding with the test methods of ISO 6742-1:2015, 4.3 (Rear lamp), 4.4 (Stop lamp), 4.7 (Direction indicators) and 4.8 (Stand light). The test voltage shall be the rated voltage of power source. 7.2 Lamps and dedicated power source 7.2.1 Lamps emitting light to the front Lamps have to be tested corresponding with the test methods of ISO 6742-1:2015. 4.2 (Front position lamp), 4.5 (Low beam), 4.6 (High beam) and 4.7 (Direction indicators). The test voltage shall be the rated voltage of power source or dedicated power source. 7.2.2 Lamps emitting light to the rear Rear lights have to be tested corresponding with the test methods of ISO 6742-1:2015, 4.3 (Rear lamp), 4.4 (Stop lamp), 4.7 (Direction indicators) and 4.8 (Stand light). The test voltage shall be the rated voltage of power source or dedicated power source. 7.3 Common test methods for lighting systems 7.3.1 CorrosIon testing The entire lighting system (front lights, rear lights in functional assembly conditions) shall undergo corrosion testing according to ISO 9227. A total of 96 h shall be run with a salt concentration of S %. 7.3.2 Water resistance Battery rear lights in functional assembly conditions shall undergo water spray testing according to IEC 60529, regarding class IPX4: protection against water sprays. Battery front lights shall fulfil the class IPX4. At the end of the test allow the unit to drain for 1 h. 8 Instructions The instructions shall be provided with lighting devices. These instructions can be provided in all type of format (paper, CD, website…) according to national regulations and shall be written in the language of the country where the lighting device is to be marketed or by visual tools, such as pictograms and illustrations shall feature prominently in the product safety information. When an electronic format is provided, a paper version shall be available upon request. The customer shall be made aware of this information...